Different industries and fields have different requirements for the performance of aluminum plates. In the machining and other industries, the hardness of aluminum plates is particularly strict. This requires hardening during the production of aluminum plates to increase the hardness of aluminum plates and meet performance requirements. At present, there are two mainstream processing methods, which are processing strengthening and solid solution strengthening. The two methods are briefly introduced below:
Processing strengthened aluminum plate
Work hardening is also called cold work hardening, that is, cold deformation processing of aluminum plates below the recrystallization temperature, such as forging, rolling, drawing, stretching, etc. During cold deformation, the density of dislocations inside the aluminum plate increases and entangles with each other to form a cell structure. , Hinder dislocation movement. The greater the degree of deformation, the more severe the dislocation entanglement, the greater the resistance to deformation, and the higher the strength. The degree of strengthening after cold deformation varies with the degree of deformation, deformation temperature, and the nature of the material itself. When the same material is cold deformed at the same temperature, the greater the degree of deformation, the higher the strength and the lower the plasticity.
Solid solution strengthened aluminum plate
Adding certain alloying elements to pure aluminum to form an infinite solid solution or a finite solid solution can not only obtain high strength, but also obtain excellent plasticity and good pressure processing performance. The most commonly used alloy elements for solid solution strengthening in general aluminum plates are copper, magnesium, manganese, zinc, silicon, nickel and other elements. Generally, the alloying of aluminum plates forms a limited solid solution. Binary alloys such as Al-Cu, Al-Mg, Al-Zn, Al-Si, Al-Mn, etc. all form limited solid solutions, and all have a large limit solubility. Greater solid solution strengthening effect.
The hardness of the strengthened aluminum plate will be significantly improved, but its hardness cannot be improved all the time; when the upper limit of the hardness is reached, no matter what method is used, the hardness of the aluminum plate cannot be continued to increase, and only the base hardness can be selected. Grade.










