How To Strip Anodized Aluminum

Jun 11, 2024

Leave a message

Removing Anodized Aluminum
If you've ever checked out some bike forums or other forum posts on how to remove anodized coatings, you've no doubt seen our top picks on our list of anodized aluminum removers. Half of the products on our list are actually common household cleaners, like drain cleaners or oven cleaners. But like we said, simply soaking or spraying the solution on aluminum parts doesn't always work. It's important to do this in a controlled environment, but we'll talk about safety precautions later.

 

Sodium Hydroxide: Also known as caustic soda or lye (NaOH), this is the most common method for removing anodized coatings. The concentration of caustic soda is usually 2-10% by volume of 50% liquid caustic soda in water. Depending on the bath concentration and temperature, the anodized coating should strip within seconds to minutes.
Potassium Hydroxide: Also known as caustic potash (KOH), this solution acts as a strong base (alkali) and reacts well with acids. It's commonly found in drain cleaners along with sodium hydroxide and sulfuric acid. When used together, this corrosive etching solution will most likely give a part a matte appearance.
Acid Etching: This process involves a mixture of chromic acid (CrO3) and phosphoric acid (‎H3PO4). The end result may be the same as it was before the aluminum was anodized, as this chromo-phosphoric acid solution has been shown not to affect the aluminum surface or cause further pitting.
Deoxidation: To remove the aluminum surface, a strong deoxidizer can also be used. The aluminum anodized coating is actually a thick oxide layer, and deoxidation means removing this top coating. This is one way to remove the anodized coating on your knives. It can also serve as a good guide on how to remove the color of aluminum anodizing.