Aluminum Plate Maintenance And Maintenance

May 11, 2020

Leave a message

The specific cleaning steps of the aluminum plate are as follows:

1. First rinse the surface of the board with plenty of water;

2. Use a soft cloth soaked with detergent diluted in water to gently wipe the surface of the test board;

3. Rinse the board surface with a large amount of fresh water to wash away the dirt;

4. Check the surface of the board, and focus on cleaning the places that are not cleaned with detergent;

5. Rinse the board surface with clean water until all the detergent is washed away.

Note: Do not clean the hot board surface (when the temperature exceeds 40 ° C), because the excessive evaporation of water is harmful to the board surface paint!

In particular, please choose the appropriate detergent, a basic principle is: you must choose a neutral detergent! Please do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide or sodium carbonate, strong acid detergents, abrasive detergents and paint-soluble detergents.