The advantages of curtain wall aluminum panels
The curtain wall aluminum panel curtain wall has a rich and durable texture, color and lustre, and the appearance shape can be diversified, and can be combined with glass curtain wall materials and stone curtain wall materials. Its appearance and excellent quality make it popular among owners. Its light weight is only one-fifth of marble and one-third of glass curtain wall, which greatly reduces the load on the building structure and foundation, and has low maintenance costs. , The performance price ratio is high. As far as the curtain wall aluminum panels currently used in China are concerned, most of them are composite aluminum panels and aluminum alloy single panels.
Introduction of composite aluminum plate
The composite aluminum plate is made of two layers of 0.5mm pure aluminum plate inside and outside (0.2~0.25mm for indoor use). The middle layer is 3~4mm thick polyethylene (PE or PVC) by rolling and heat bonding. The products are of certain specifications. Flat plate, such as 1220mm×2440mm. The fluorocarbon paint on the surface of the external composite aluminum plate is also completed by roller coating and rolling and heat bonding at one time. The thickness of the coating is generally about 20μm. The advantages of the composite aluminum plate are light weight, smooth surface, good flatness, and the same direction. There is no color difference and excellent on-site processability, which provides conditions for dealing with the external wall size changes caused by on-site construction errors, reducing the workshop processing cycle and shortening the installation period.
The composite aluminum panels must be processed into wall panels during installation. First, the panels must be cut according to the size of the secondary design. When cutting the panels, the folding and placing dimensions must be considered. Generally, about 30mm is added on each side. According to the curtain wall According to the installation company, the yield rate of cutting boards is generally 60% to 70%. The cut composite board needs to be grooved on four sides, that is, cut the inner aluminum sheet and plastic layer of a certain width, leaving only the outer aluminum sheet with a thickness of 0.5mm, then fold the edges to a 90-degree angle, and then use aluminum profiles to make the same size The auxiliary frame is placed in the bent groove of the aluminum-plastic plate. The bottom surface of the auxiliary frame is bonded with the back of the aluminum-plastic plate with structural glue. The four folded sides are fixed to the outside of the auxiliary frame by riveting. There are reinforcing ribs to ensure the mechanical strength of the wall panel. The reinforcing ribs are made of aluminum and bonded with structural adhesive. Some informal methods only fix the four corners of the composite board with angled aluminum. The reinforcing ribs are bonded with double-sided tape, which is firm Greatly discounted.










