Stacking method of patterned aluminum plate
The use of patterned aluminum plates is very wide. Three-reinforced, five-reinforced, and pointer-type patterned aluminum plates are all common varieties. The patterned aluminum plates can be seen in the fields of construction, transportation, decoration, and refrigeration equipment.
There are many kinds of patterned aluminum plates, which can be seen everywhere in our days, but many patterned aluminum plate manufacturers do not know how to stack the patterned aluminum plates for products. It can be divided into work-in-process warehouse and product warehouse. Products include patterned aluminum plates to be finished, and a warehouse for stacking patterned aluminum plates. The patterned aluminum plate under finishing, the patterned aluminum plate waiting for physical and chemical inspection after finishing, and the unplanned patterned aluminum plate that is not produced in accordance with the order contract. The stacking methods of patterned aluminum plates are as follows:
1. The patterned aluminum plates of the same furnace number (common carbon steel can be used for batch numbers) should be stacked together so that the whole furnace patterned aluminum plates or the whole batch of patterned aluminum plates can be finished together without disturbing the processing process of the patterned aluminum plates. In addition, it can also prevent Mix and drop.
2. The patterned aluminum plates of the same order contract should be put together to organize production according to the contract.
The stacking methods of patterned aluminum plates are as follows:
1. Regardless of the steel type, it is piled up separately according to the cross-section of the patterned aluminum plate;
2, regardless of the cross-section of the patterned aluminum plate, it is piled up according to the steel type;
3, pile up according to the order contract
4. Stacking by the heat number (batch number) of the patterned aluminum plate. Due to various reasons, the above-mentioned stacking methods are not used alone, but based on the specific production conditions, and set sail from the production point of view.
Patterned aluminum plate accumulation should also pay attention to the following matters.
1. When stacking patterned aluminum plates, it is necessary to make the mark end of the patterned aluminum plates face one side in order to find the required patterned aluminum plates.
2. The stacking height should meet the requirements of the technical regulations and the stacking position should be more than 2m away from the railway or highway, and it is necessary to leave a passage no narrower than 1m between the stacks.
3. It is necessary to have horns or racks for stacked patterned aluminum plates to prevent the stack of patterned aluminum plates from sinking and tilting.