Manufacturers of aluminum plates, plates and strips

Oct 19, 2021

Leave a message

The aluminum passes through the hot and cold rolls, making it thinner and longer in the direction of the rolls. In this rolling process, the aluminum slab is either cold-rolled or heat-treated to increase its strength, and then rapidly cooled to room temperature through further processing. They age naturally or artificially in the furnace. Finally, trim the board to its final size. The boards produced in this way can be used in full thickness, but are usually processed into a variety of simple to complex shapes, such as boards, slats, and foils. Sheets are most widely used in various industrial aluminum applications, such as aerospace body manufacturing, automobile body panel transportation, tank and can packaging, and building exterior wall construction. As a standard, as explained by the Aluminum Association, "Aluminum from 0.008 inches to less than 0.25 inches thick is considered a sheet. The thinner aluminum is a foil and 0.250 inches of aluminum, and the thicker is a plate." The material is a sheet processed into a unit with a smaller width for a specific application.

消息