How to deal with the problems encountered in the processing of aluminum profiles?
In general, during the processing of aluminum profiles, many of them need special attention. The first is the processing of aluminum profiles. Due to their light weight, easy processing, light weight and softness, stamping is easy to break, and some aluminum alloy products require subsequent surfaces. At this time, you must do wire drawing and anodizing treatment. At the same time, we must pay attention to product quality during the processing of aluminum profiles, and strive for excellence in the production process, so as to avoid top scratches and scratches.
We all know that during the processing of aluminum profiles, aluminum profiles are often prone to cracking, because aluminum materials are prone to produce aluminum scraps during bending, which will cause point injuries. You must do a good job in polishing, especially in the case of reverse folding, Therefore, try not to do crimping. If you have to do crimping, you should make the crimping wider and shallower. In addition, the stamping parts that need to be processed after anodizing, especially the aluminum profile will have acid spitting phenomenon. At this time, you need to leave a 0.2-0.3MM seam to allow the acid to flow out in time.