Application of curtain wall aluminum plate:
As far as aluminum curtain walls are currently used in China, most of them are composite aluminum sheets and aluminum alloy veneers.
1. The composite aluminum plate is two layers of 0.5mm pure aluminum plate (0.2~0.25mm for indoor use). The middle layer is 3~4mm thick polyethylene (PE or polyvinyl chloride PVC). Specification of flat plate, such as 1220mm×2440mm. The fluorocarbon paint on the surface of the external composite aluminum plate is also completed by roller coating and rolling and heat sealing at a time. The thickness of the coating is generally about 20 μm. The advantages of the composite aluminum plate are light weight, smooth surface, good flatness, and the same direction It has no color difference and has excellent on-site machinability, which provides conditions for dealing with the changes in the size of the external wall caused by on-site construction errors, reducing the workshop processing cycle and shortening the installation period.
2. The composite aluminum plates need to be processed into exterior wall panels during installation. First, the panels should be cut according to the size of the secondary design. The size of the folded edges should be considered when cutting the plates, generally about 30mm on each side According to the introduction of the installation master of Greenscape Building Materials curtain wall, the rate of finished boards is generally 60%~70%. The cut composite board needs four-sided planing, that is, the inner aluminum plate and the plastic layer of a certain width are cut, and only the outer aluminum plate of 0.5mm thickness is left, and then the edge is folded to a 90-degree positive angle, and then the aluminum profile is used to make the same size The subframe is placed in the curved groove of the aluminum-plastic panel. The bottom of the subframe is bonded to the back of the aluminum-plastic panel with structural adhesive. The folded four sides are fixed to the outside of the subframe by riveting. There are reinforcing ribs to ensure the mechanical strength of the wallboard. The reinforcing ribs are made of aluminum and are bonded with structural adhesive. Some irregular methods only use corner aluminum to fix the four corners of the composite board. The double-sided tape is used to bond the reinforcing ribs. Great discount.
3. The aluminum alloy veneer is generally 2~4mm aluminum alloy plate. When it is made into a wall panel, the sheet metal is processed according to the requirements of the secondary design, the edges are directly folded, and the four corners are welded into a tight groove by high pressure. The fixing bolts of reinforcing ribs are reserved on the back of the wallboard by means of electric welding and nail planting. After the sheet metal work is completed, the fluorocarbon paint is sprayed. Generally, there are two coatings and three coatings, and the thickness of the paint film is 30~40μm. The aluminum alloy veneer is easy to be processed into arcs and multiple folds or acute angles, which can meet the needs of today's ever-changing exterior wall decoration, and it is rich in color. It can be arbitrarily selected according to the design and owner's requirements, which really broadens the architect. Design space.
Aluminum curtain wall has always been the dominant one among metal curtain walls. Lightweight materials reduce the load on the building and provide good selection conditions for high-rise buildings. It has excellent waterproof, anti-fouling and anti-corrosion properties, ensuring the long-term development of the external surface of the building. , Processing, transportation, installation and construction are relatively easy to implement, providing strong support for its wide use, the diversity of colors and the combination of processing into different appearance shapes, expanding the architect's design space, higher performance price It is easy to maintain, has a long service life and meets the requirements of the owner.










